Marine Hatch Seal Tape

PRODUCT

NAME

Marine Hatch Seal Tape

THICKNESS (mm)

0.7mm---4mm

WIDTH (cm)

5---100

LENGTH (m)

7.5m--20m (Normal:10m per roll)

Isolation paper

PE film / Wax paper / PET film......

Top surface

Aluminum foil / PE film / Sand / HDPE film......

Product

feature

1)Self adhesion without bonding agent or torch.

2)Good rubber elasticity and elongation.

3)Excellent adhesion bond

4)Good self-healing

5)Cold&easy application,no pollution

6)Corrosion-resistance / aging-resistance

7)Available for wet ground

8) Self adhesive bitumen Hatch cover tape / Marine tape

Usage

General:

Sealing around pipes and tanks, repairs to weatherproof enclosures, sealing over wood,

concrete brick most metals and some plastics.Vehicle/ships maintenance and repair,

Hatch cover sealing,Sound damping

Construction:

Flashing & Sealing to felt asphalt and bitumen surfaces, flashing of conservatories and porches, roof skirtings and parapet joints, sealing of roof light, windows,door,vents,

pipes, and other openings, repair bandage for gutters and roofs, sealing glazing bars,

cappings and protective coverings.

Storage

Store the rolls in dry conditions with +5 dg C --- 25 dg C with original packaging.

Shelf-life approximately 12 months.

Do not expose to petrol, white spirit, paraffin and similar organic solvents which will dissolve the bitumen.

Surface

preparation

Surfaces must be clean of dirt loose material, grease and oils. Rough or porous

surfaces must first be treated with Bitumen Primer.

Packing

bitumen Hatch cover tape / Marine tape

Seaworthy shrinkage paper,then carton outside or as customers’need.

Matters

need

attention

1)Do not use in permanently submerged joints.

Bitumen may cause staining on some substrates.

2)Check for compatibility with other sealants.

3)Do not use in joints subject to traffic.

4)Do not encase in cement.

The user is advised to conduct tests to determine the suitability of the product

for the Intended application.