How to use?STEP 1 - Overlap one liner with the other a minimum of 4inches. Using the provided sponge and scouring pad, clean and/or prime both surfaces where the tape will be applied.If using solvent based primer, always wear protective gloves
and eyewear.
STEP 2 - Mark the bottom liner to indicate the final location of the top liner (crayon not included).
STEP 3 - Apply the tape along the line on the bottom layer. Roll the provided seam roller over the entire tape surface,
applying firm pressure to ensure proper adhesion.
STEP 4 - Place the top liner over the bottom liner ensuring the tape backing paper is fully covered. Remove the backing
paper by slowly pulling it out at a 45 degree angle. Apply pressure to the top liner with your hand, making sure to keep
it aligned with the line.
STEP 5 - Roll the provided seam roller over the entire seam surface, applying firm pressure to ensure proper adhesion.
