Description:
WF96i Water-tight mastic has excellent adhesive property, waterproof moisture resistance, excellent high and low-temperature resistance, as well as alkali, acid, salt, chemical corrosion, etc. Even in cold climates, WF96i waterproof cement can remain active and can retain its strong waterproof sealing property. It can also retain the wire insulation tape and other outsourcing without any side effects. WF96I Water-tight mastic is highly conformable. It can be used for communication equipment base station, antenna, feeder, and other indoor waterproof seal joints. It can also be used for moisture sealing, insulation in power cables, and sinking wires through 600V.
Directions for use
1. Clean dust and grease the cable connector regularly.
2. Remove the separator from tape. Make sure the tape has adhesive on it during connections.
3. Exceed 30mm-50mm joint fore and aft part when wrapped.
Application
● Antenna connector waterproof
● RRU connector waterproof
● Ground wire waterproof
● Applicable in Macro stations and special scenes.
Properties
ITEMS | Value |
Adhesive force （N/25mm） | 50 |
Shear adhesion (N/cm2) | 43 |
Retention force (min) | 110 |
Tensile elongation (%) | >300% |
Tensile Strength | 0.4-1.1Mpa |
Water absorption | <0.2% |
Installation temperature | +5--+35℃ |
Aging Resistance | >20 years |
Service temperature | -40℃-100℃ |
Insulation performance | Good |
Heat Resistance | No overflow at 150℃ for 5 hours |
Sizes:
0.125inch*1.5inch*50ft
0.125inch*1.5inch*50ft
other sizes can be cusomized.
Hot Tags: watertightness mastic, china,manufacturers, suppliers, factory, customized, price, cheap, Aluminium Foil Butyl Waterproof Tape, Single Sided Waterproof Butyl Tape, butyl tape glazing, Butyl Tape, butyl windshield sealant, Tapes
